PRO-POINT 8706160 Manuel D'utilisation page 20

8706160
PROBLEM(S)
Workpiece is
pulled out of
your hands.
Workpiece is
kicking back.
20
6 IN. 1/2 HP BELT SANDER
POSSIBLE CAUSE(S)
1. Workpiece is not
supported.
2. Workpiece is too
small.
Sanding on wrong
side of sanding disc.
For technical questions call 1-800-665-8685
SUGGESTED SOLUTION(S)
1. Use the work guard or
work table to support
the workpiece.
2. Hold workpiece with jip
or grasping tool. Also
ensure using work table
and mitre gauge for
support.
Sand on the left side of the
disc. See Kickback
Precautions.
V1.0