Publicité
Les langues disponibles
Les langues disponibles
840122600 ENv03 1/6/04 10:52 AM Page 5
Control Panel
ON/OFF Button
Indicator Light
Program/
Automatic Brew
Additional Features
Pause 'N Serve
This feature allows you to pour a cup of
coffee before the entire brew cycle has
completed. By removing the Carafe, the
flow of coffee from the bottom of the
Filter Basket will stop.
Automatic Shutoff
The Automatic Shutoff feature
shuts off the Keep-Hot Plate 2 hours
after brew cycle begins. Always turn
Coffeemaker OFF and unplug
when finished.
To Set the Clock and Program Automatic Brew
NOTES:
• The Automatic Brew feature must be programmed each time it is used.
• Make sure you have placed the desired amount of water and coffee in the unit
before using the Automatic Brew feature.
1. Plug in Coffeemaker. The numbers
on the Clock will flash until the time
is set.
2. Press the H button until the current
hour is displayed. AM or PM will
appear on display. Press the M button
until the current minute is displayed.
The Clock is now set.
3. To program Coffeemaker to automat-
ically begin brewing, press and hold
the Prog/Auto button for two sec-
onds to enter the setting mode. While
still pressing Prog/Auto, press the H
(for clock model)
CAUTION: Return carafe to Keep-Hot
Plate within 20 seconds. Hot water con-
tinues to flow into the Filter Basket
when this feature is used. Overflowing
coffee and hot water are a burn hazard.
4. To have Coffeemaker automatically
5. The Coffeemaker will shut off two
Hour
Minute
button to set hours and then press the
M button to set minutes until the
desired brew time is displayed.
begin brewing at the preset time,
press Prog/Auto button momentarily.
The Prog/Auto button will glow
green to indicate Automatic Brew is
set and coffeemaker is ready to begin
brewing. "Auto" will appear in the dis-
play.
hours after brewing begins.
5
Publicité
