yeep.me RIDER Manuel D'instructions page 3

SPEED UNIT SETTING
EN
In the power-on state, holding M button for 3s will enter in the speed unit setting
interface. Then click on or button to switch the speed unit. If there is no
operation in 10s, the dashboard will automatically exit the speed setting interface.
PASSWORD SETTING
After finish the speed unit setting, click on the M button will enter in the password
interface. The default password of the display is 1919.
The number will changed from 0 to 9 or 9 to 0 when using or button.
To confirm the number click on the M button
WHEEL DIAMETER SETTING
After input the correct password, you can see the display below.
By clicking on or button, you can select the corresponding wheel diameter
to ensure the accuracy of the display speed and the distance indication.
3