Important Safety Instructions - Husqvarna BLi10 Manuel D'utilisation

Masquer les pouces Voir aussi pour BLi10:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION:
damage to the product, other materials or the
adjacent area if the instructions in the manual
are not obeyed.
Note:
Used to give more information that is necessary in
a given situation.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
all instructions. Failure to obey the warnings
and instructions may result in electrical shock,
fire and/or serious injury.
Note:
Save all warnings and instructions.
Only use the battery chargers, QC80, or QC250 to
charge Husqvarna original batteries. The batteries are
software encrypted.
Use the BLi10, BLi20, BLi30 batteries that are
rechargable as a power supply for the related
4
Used if there is a risk of
Read all safety warnings and
Husqvarna products only. To prevent injury, do not use
the battery as a power supply for other devices.
Do not try to disassemble or repair the battery. All
repairs is to be done by an approved dealer only.
Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
Do not use a defective or damaged battery or battery
charger.
Do not cause mechanical shock to the battery.
Do not remove the battery from its package until you
are to use it.
Do not let battery acid touch your skin. Battery acid
causes injuries to the skin, corrosion and burns. If you
get battery acid in your eyes, do not rub but flush with
water for a minimum of 15 minutes. If battery acid has
touched your skin, you must clean the skin with a large
quantity of water and soap. Get medical aid.
Keep the battery away from children.
Keep the battery clean and dry.
Clean the battery terminals with a clean dry cloth if
they become dirty.
Do not keep the battery in the battery charger when it
is fully charged.
856 - 006 - 16.04.2020

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bli20Bli30

Table des Matières