Franke HHF23T Instructions D'installation Et D'utilisation page 2

3. Installation Guide
1 3/8" - 1 1/2"
1 9/16" - 2"
Cold
Setting Sensor Range
Once faucet is installed, disconnect the sensor from the power (Fig. 6, A-B for 30 seconds). Reconnect it until
the sensor light is flashing. Place a hand in front of the sensor at a distance where you want the water flow to
trigger.
Hold hand in place until the light stops flashing. You have now set the sensor.
If you find the sensor range has changed after use, reset the sensor distance as above.
2
HHF23TZMI | 05/20