Princess Blender2Go Mode D'emploi page 20

All manuals and user guides at all-guides.com
Before you proceed, we need you to pay attention to the following notes:
­ The appliance has been designed for mixing cold and lukewarm
ingredients (max. 55 °C). It is recommended not to use the appliance
for mixing hot liquids and solids. Hot liquids and solids can easily cause
the jar to break and the jar lid to abruptly come off the appliance due
to steam pressure. Keep the jar lid pressed with your hand when mixing
lukewarm liquids to prevent leakage.
1. On/off button
2. Power indicator
3. Blade
4. Seal ring
5. Jar
6. Jar lid
7. Jar lid insert
8. Bottle (217400 only)
9. Bottle lid (217400 only)
10. Juice level indicator
Assembly (fig. A & B)
Before you proceed, we need you to pay attention to the following notes:
­ Before assembly or disassembly, switch off the appliance, remove the
mains plug from the wall socket and wait until the appliance has
cooled down.
Mounting the jar (fig. A)
• Place the seal ring (4) onto the blade (3).
• Mount the blade (3) to the bottom of the jar (5). Lock the blade (5)
by turning it clockwise.
• Mount the jar (5) onto the appliance. Lock the jar (5) by turning it
clockwise.
• Mount the jar lid (6) onto the jar (5).
• Mount the jar lid insert (7) into the jar lid (6). Lock the jar lid insert (7)
by turning it clockwise.
20