Princess Blender2Go Mode D'emploi page 16

All manuals and user guides at all-guides.com
other liquids, do not remove the appliance with
your hands. Immediately remove the mains plug
from the wall socket. If the appliance is immersed
in water or other liquids, do not use the appliance
again.
•
Clean the appliance and the accessories. Refer
to the section "Cleaning and maintenance".
Electrical safety
•
Before use, always check that the mains voltage
is the same as the voltage on the rating plate of
the appliance.
•
The appliance is not intended to be operated
by means of an external timer or separate
remote­control system.
•
Connect the appliance to an earthed wall socket.
If necessary, use an earthed extension cable of
a suitable diameter (at least 3 x 1 mm
•
For additional protection, install a residual current
device (RCD) with a rated residual operating
current that does not exceed 30 mA.
•
Make sure that water cannot enter the contact
plugs of the mains cable and the extension cable.
•
Always fully unwind the mains cable and the
extension cable.
16
).
2