Temperature Settings - Danfoss Cf-Rd Manuel D'instructions

Instruction CF-RD Room Thermostat with Display
Room Thermostat installation status
• Satisfactory - LED
• Not satisfactory - LED
Note: A Room Thermostat can be assigned to sev-
eral outputs if needed

3. Temperature Settings

Digital Display - g. 1
Set value adjustment
Minimum temperature limitation
Maximum temperature limitation
Lock icon (settings locked from
Remote Controller, CF-RC)
Transmission link icon
Low battery indicator
Alarm icon
Timer icon (time & zone control set
from Remote Controller, CF-RC)
Setting of Temperatures - g. 1
• The actual room temperature is shown in the
display as default
VI.UH.Q3.80
6
goes OFF
ashes 5 times
Produced by Danfoss Floor Heating Hydronics 01.2006