Technical Data; Initial Start Up; Check The Device And Delivered Accessories; Prior To Start Up - Trodat DRYTEQ Mode D'emploi

4 Technical data

Description
Model: Product:
dryteq
Default exposure time
Supply
Input voltage
Protection class
Storage temperature
Permissible operating
temperature

5 Initial start up

5.1 Check the device and delivered accessories

1. Take the device and the accessories out of the
packaging.
2. Check whether the delivery is complete.
3. Check whether the device or its accessories are
damaged. If there is any damage, do not use the
device. Contact the manufacturer using the
indicated service address.
Note
Fully charge the dryteq UV exposure
unit's battery.
Use the cable with the USB-C interface. Charge
the dryteq UV lamp with a USB charger (charging
current at least 500 mA) or PC (USB 2 or
USB 3 interface).
Dimensions
dryteq blk 25 x 20 mm
v1.0
2 seconds
Lithium-ion polymer
battery
5V
IP10
-20°C to +60°C
0°C to 45°C

5.2 Prior to start up

11
EN