MoJack PRO Directives D'assemblage Et D'utilisation page 10

Some steps of the Operating Instructions are repeated from the
Assembly Instructions. The Operating Instructions will show a full
Before using the MoJack PRO, carefully read this manual in its entirety.
Preparing the MoJack PRO for Use (Steps 1 - 8)
STEP 1
Unfolding MoJack PRO
• Pull locking pin out to unlock.
• Raise the Tower by pulling up on the Grip Handle.
Once the Tower is in the vertical position, lift up on
the Grip Handle and drop the Tower into the Base.
• The tower will be securely locked in place when the
locking pin retracts and the tower is snug in the
channel behind the crossbar.
Drop Tower into Base
Crossbar
When Tower is
above the bar,
unit is NOT
locked and
UNSECURE.
MoJack PRO Lift
Operating Instructions
working cycle of the MoJack PRO.
Tower Locking Pin
(unlocked position)
Tower Locking Pin
(unlocked position)
Crossbar in
channel
When Tower sits
behind the bar,
unit is locked
and fully secure.
10
Tower Locking
Pin
(locked position)