Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13 to 14 LEDs according to the models.
The statuses LED indicate:
LED
Color
Power
Green
Red/
Diag
Green
Red/
C-Key
Green
Optional
Green
PSE
LAN 1
Green/
LAN 2
Yellow
LAN 3
Red/
LAN 4
Yellow
WiFi
Green/
State
Red
WiFi
Blue
Activity
LEDs definition
This LED turns on if the product is properly
powered.
This led indicates the unit operational state.
OFF:
Power supply is off
Red:
Initialization during 40s after power is
applied then goes Green
Red for more than 120s: hardware failure
Green:
Ready to use
Blinking: Firmware in flash is not valid; please
load new firmware with NDM
Off:
C-Key in factory state
Red:
the C-Key is not detected, data is invalid
or corrupt
Green:
the C-Key data is valid
Blinking: during reads and writes to the C-Key
Off:
no PoE device is powered by RailTrack
Solid "On": a PoE device is powered by RailTrack
(LAN 2 only)
Blinking: error detected when powering a PoE
device
Off:
Ethernet Link broken
On:
Ethernet Link established
Yellow:
connected in 1000 BASE T
Green:
connected in 100 BASE Tx
or 10 BASE T
Blinking: Tx/Rx activity
Off:
No SFP module detected
Red:
SFP module detected by RailTrack but
no fiber connection
Yellow:
fiber connection established
Blinking: Tx/Rx activity
Off:
radio card disabled
Solid Green : the product is associated
Blinking Green : the product is unassociated
Solid Red : NOP state (DFS)
Blinking Red : CAC state (DFS)
Flashing: Radio Tx/Rx activity
-8-
Description
Publicité
Table des Matières
