Acksys RailTrack Série Guide D'installation Rapide page 19

5. Device configuration
Click on the « Web » button to access from your web browser to the built-in
web-based interface using your web browser. The default page displays the
device status. Now select the "SETUP" tab.
You will be asked for a username and password. You must choose the root
user. No password is required by default. You get now access to the setup
page.
On the "wireless overview" page you should first select your country in order
to enforce applicable regulation rules. The country selector is located in the
global parameters, near the bottom of the page.
You can select any radio interface to set up its Wi-Fi parameters (alternatively
you can navigate to change network and services configuration). Set the
following essential parameters:
The operating mode: Access point, client (bridge), Mesh
o
Wi-Fi parameters: 802.11 mode, radio channel (take care about your
o
country legislation), SSID
Wi-Fi security parameters (WEP, WPA, WPA-PSK, WPA2, WPA2-
o
PSK, SSID broadcast or not)
You will find a complete description of all modes in the user guide.
Upon delivery, the default factory settings are:
Radio interface disabled, preset for access point mode,
o
SSID : "acksys" (broadcasted)
o
No security (no WEP, no WPA, no WPA2, no MAC filter)
o
802.11n or ac mode, 5GHz band, auto-channel
o
-3-