Table Des Matières; Thanks For Choosing Toto; Included Parts; Common Tools Needed - Toto CST412MF Manuel D'installation Et D'utilisation

Thanks for Choosing TOTO! ..................................................................................................................................................................2
Included Parts ..........................................................................................................................................................................................2
Common Tools Needed ..........................................................................................................................................................................2
Before Installation ................................................................................................................................................................................ 2-3
Installation Procedure .......................................................................................................................................................................... 3-4
Fill Valve Replacement Instructions ........................................................................................................................................................5
Fill Valve/Flush Valve Servicing Instructions...........................................................................................................................................5
Warranty....................................................................................................................................................................................................6
The mission of TOTO is to provide the world with healthy, hygienic and more comfortable lifestyles. We design every product
with the balance of form and function as a guiding principle. Congratulations on your choice.
Check to make sure you have all these parts from the package:
Modular Rough-In
(for 414 model only)
Lid, Tank
Top Mount Bolt Set
• 12" pipe wrench
• 10" adjustable wrench
• Carpenter's Level
• Tape Measure
• Flexible Supply Tube / Connector
• Supply Stop Valve
„ Read these instructions thoroughly before beginning work.
„ Please leave instructions for customers. These instructions contain maintenance and warranty information.
„ If necessary, remove the existing toilet and if new construction, purge the supply line.
IMPORTANT!
Due to the powerful performance of our Cyclone, G-Max, E-Max and Power Gravity flushing systems, they are not specified for back-to-back
installations. The only means of installing these toilets in a back-to-back situation is when the toilet drain connections incorporate a WYE fitting.
Please contact your builder or contractor prior to this installation.
TABLE OF CONTENTS

THANKS FOR CHOOSING TOTO!

INCLUDED PARTS

Socket
(for 412, 416 &
464 models)
Screw & Washer
for Mounting
Block Installation
(for seat)
(4 pieces each)
(Not pictured but also included: Socket Template, Tank-to-Bowl Gasket)

COMMON TOOLS NEEDED

• Screwdriver
• Putty Knife
• Drill
• Pliers
MATERIALS REQUIRED:
(Not Included)
• Mounting (T) Bolts & Nuts (2pc)
• Wax Ring / Seal

BEFORE INSTALLATION

Double Combination WYE / 1/8 Bend
YES
Mounting Block
White Anchor
(2 pieces)
(4 pieces)
Side Screw and
Side Screw Cap for
Screw with Washer
Mounting Block
(2 pieces)
(2 pieces each)
• For wood floor installation:
- 3/32" drill bit for Socket or Modular Rough-In
- 11/64" drill bit for Mounting Block
• For concrete/tile installation:
- 9/32" drill bit for Socket or Modular Rough-In
- 11/32" drill bit for Mounting Block
Double Sanitary Tee / Sanitary Cross
NO
2
Tank Mounting
Hardware (2 pieces)
Green Anchor
(2 pieces)
(for 414 only)