Wiring Diagram; Plumbing Diagram - elem garden technic FB1500-5TEG52 Mode D'emploi

Before operating the log splitter, the Bleed Screw should be loosened by some
rotations until air can go in and out of the oil tank smoothly.
Air flow thru the Bleed Screw hole should be detectable during the log splitter
is under operations.
Before moving the log splitter, make sure the Bleed Screw is tightened to avoid
oil leaking from this point.
15. Max Pressure Limiting Screw
Max pressure was set before the log
splitter ex work and the max pressure
limiting screw is sealed with glue to
ensure the log splitter works under
pressure no more than 5 tons. The
setting was done by qualified
mechanic with professional
instruments.
15
Unauthorized resetting will cause the
hydraulic pump fail to output enough
splitting pressure or

WIRING DIAGRAM

PLUMBING DIAGRAM

34