Adam Hall LD Systems DS2.1 Mode D'emploi page 8

SYSTEM SETUP:
L&R VOLUME
GAIN= 0.0dB
L&R PHASE
[ 0 ]
L&R XOVER
XOVER= OFF
L&R DELAY
Time= 0ms
L&R Limit
Treshold= off
L&R Limit
Hold= 100
RECALL PROGRAM
P1: PRESET 1
08
Adjust the output level of the L&R channels using the Edit-knob.
Adjust the phase of the L&R channels using the Edit-knob.
Adjust the XOVER of the L&R channels using the Edit-knob.
Adjust the delay time of the L&R Channels using the Edit-knob.
Here you can activate or deactivate the limiter for the L&R
channels as well as adjust the limiters' threshold value using the
Edit-knob.
You can also adjust the hold time of the limiter using the Edit-
knob.
To recall a program press the recall button.
Now select the program you would like to recall using the Edit-
knob and press recall to recall the program.