System Setup - Adam Hall LD Systems DS2.1 Mode D'emploi

When you power up the unit, the system displays the main interface, showing the realtime input levels. Press
"PARAMETER" to view the menu.
By repeatedly pressing the "PARAMETER" button you can access the system settings.
L:
Sub:
SUB VOLUME
GAIN= 0.0dB
SUB MUTE
[ De-Mute ]
SUB PHASE
[ 0 ]
SUB DELAY
TIME= 0ms
SUB LIMIT
Treshold= off
SUB LIMIT
HOLD= 100
Realtime metering of the inputs.
R:
Adjust the input level of the subwoofer with the Edit-knob.
Use the Edit-knob to mute or unmute the subwoofer.
Here you can adjust the phase of the subwoofer using the Edit-
knob.
You can adjust the delay time for the subwoofer using the Edit-
knob.
Here you can activate or deactivate the limiter for the subwoofer
channel as well as adjust the limiters' threshold value using the
Edit-knob.
You can also adjust the hold time of the limiter using the Edit-
knob.

SYSTEM SETUP:

07