Troubleshooting; Troubleshooting The Power Source - Fronius Transpocket 1500 Rc Hd Instructions De Service

Troubleshooting

Mains fuse and/or safety cut-out has tripped
the power source
(continued) Cause:
Remedy:
Cause:
Remedy:
Loud bang
- in some cases with the mains fuse or automatic circuit-breaker being tripped as well
Cause:
Remedy:
Mains fuse protection is too weak; incorrect safety cut-out
Ensure correct mains fuse protection (see "Technical data")
The mains fuse is tripped under no-load conditions
Send the machine in for servicing
Varistor (overvoltage protector) has been tripped; mains voltage error
Replace the varistor - may only be done by skilled, trained personnel -
otherwise send the machine in for servicing
12