Technical Parameters - Oceanic OCEARPUR45 Guide D'utilisation

TECHNICAL PARAMETERS

Reference
Rated Voltage
Rated Power
For more information ,please contact
TROUBLESHOOTING
If your air purifier does not run smoothly, please check the following before
maintenance.
Phenomenon
Machine can not
start
Odor in the outlet
None obvious dust
removal effect,
none air quality
improvement
Running noise
loud
Main buttons not
work
Filter cannot be
installed
OCEARPUR45
220-240V~ 50/60Hz
45W
Possible reason
C. Unplug power plug.
D. Machine rear cover not in
position.
C. More pollutants indoor such
as more smoking.
D. Filter is polluted severely
D. Filter is not installed into the
machine.
E. Machine is placed in narrow
space or
obstacles nearby
may have negative impact
on the purification effect.
F. Filter is too dirty.
C. Whether the installation is
not tight.
D. Other matter stored in the
machine.
LOCK mode is worked.
Filter is installed opposite.
Model
Coverage Area
Protection class
A.M.C
123, Quai Jules Guesde
94400 VITRY SUR SEINE
FRANCE
C. Reconnect power plug.
D. Re-install the rear cover in
C. It is recommended that the
D. Replace with the all new filter.
D. Install the filter correctly.
E. Place the unit at least a foot
space with
which
F. Replace for new combination
C. Contact after-sales center.
D. Clean other matters.
Press 3 second to turn off the
LOCK mode
Adjust the filter to right direction
and install the filter to the bottom
slot.
KJ210F-142
2
25m
II
Solution
position.
room air be changed.
away from the obstacles.
filter.