Cleaning And Maintenance - Oceanic OCEARPUR45 Guide D'utilisation

CLEANING AND MAINTENANCE

Filter Replacement
When the filter indicator light turns red, it needs to replace the filter.
4. Adjust the direction of the new filter to correspond to the filter slot of the
purifier and install the filter in, and then close the cover.
5. Turn on the power, touch the "ON/OFF" button to turn on the unit. And long
press the "timer + ON/OFF" button for 3s to reset the filter time.
1. Turn off the unit and plug off the power cord.
2. Open the filter cover
After the unit is powered off, remove the back cover
from the buckle position.
3. Please take out the composite filter, and pack the
used filter into bag to avoid any second pollution.
C. The preliminary filter can be cleaned and reused.
D. The composite filter is reaching its lifespan and cannot
be reused even if it is clean. Please treat it as
non-burnable waste.