Austroflamm WirCU-BOX Manuel D'instructions page 32

1 | Mounting the WiRCU-BOX (WLAN)
32
EN
12) Wait until the message "Settings successfully transmit-
ted to WiRCU" appears. Then press "Finished".
13) Now disconnect the data cable from the WiRCU box.
Then shortly after, reconnect the cable.
14) Now wait until all 3 LEDs on the top of your WLAN box
are permanently lit. (Should this not be the case, re-
peat the process as per the section
How to create the connection to your WLAN network
using an Android device [}on page 28] and / or follow
the sectionThe WLAN network "WiRCU-XXXXXX" is
not found [}on page 40]).
15) In the window displayed, now enter the MAC address
and PIN number of your WiRCU box. You can find this
data on the WiRCU box or on the information card
supplied with it.
WiRCU-BOX