Austroflamm WirCU-BOX Manuel D'instructions page 29

WiRCU-BOX EN 1 | Mounting the WiRCU-BOX (WLAN)
1) Launch the AUSTROFLAMM PELLET CONTROL APP.
On launching, the APP displays the menu page
shown.
2) Press "No" unless your WiRCU box is already connec-
ted to your WLAN network.
3) The APP will guide you step by step with instructions
through the connection process. Follow these instruc-
tions.
4) Press the "SETUP WiFi RESET" button on the WLAN
box. After the button is pressed, the WLAN LED will
flash rapidly (see Section LED display/function inform-
ation [}on page 40]).
5) The WiRCU box then switches on its own WLAN net-
work "WiRCU XXXXXX".
After starting this process, you have about 3 minutes
to establish the connection between the WiRCU box
and your WLAN network. (If you exceed this period,
you will have to repeat the connection process.)
29