Austroflamm WirCU-BOX Manuel D'instructions page 28

1 | Mounting the WiRCU-BOX (WLAN)
1.3 Downloading and integrating the Austroflamm PelletControl APP
To incorporate the WirCU box into your WLAN network you will need the Austroflamm PelletControl
APP on your SmartDevice.
The WLAN box can only be operated with the Austroflamm PelletControl APP. The current version of
the Austroflamm PelletControl APP is available for download in the APP Store (for iOS operating sys-
tems) and at Google Play (for Android operating systems). You can download the APP by scanning the
relevant QR code:
Android PelletControl
Working with your SMART DEVICE (telephone, Tablet, etc.), and the AUSTROFLAMM PELLET CON-
TROL APP, the WiRCU box enables remote access to your heating appliance.
How remote access works:
• Commands are conveyed via the Austroflamm PelletControl APP, the Internet and the Cloud server
to the controls and the operating system (display or control knob). Please be aware: There is a time
delay between inputting the command and its execution.
• For the stoves with rotary control, the rotary control must be positioned at 3 o'clock for the WLAN
box to work.
• If you connect the WLAN box to a WLAN modem/router/Smartphone that is operated with mobile
data, please bear in mind the additional costs for data transmission.
1.3.1 How to create the connection to your WLAN network using an Android device
• Enable WLAN on your Smartphone.
• Launch the Austroflamm PelletControl APP.
• The instructions for setting up the WiRCU Box are displayed in the language set for your SMART
DEVICE (see Section Changing the APP language displayed [}on page 41]).
• Read and confirm the end user licence agreement.
• Carefully carry out the following steps.
28
EN
iOS PelletControl
WiRCU-BOX