Original instruction manual
CLEANING AND STORAGE :
Always disconnect from main socket before cleaning the unit or
air filter.
Avoid contact with moving parts.
Use only a soft and damp cloth to clean the unit.
Do not clean the unit by spraying it or immersing it in water or any
other liquids and never allow water to drip into the housing.
Do not use gasoline, paint thinner or other chemicals to clean the
unit.
Ensure that the unit is switched off from the main socket before
removing. Don't lift or move by pushing the unit to prevent it from
leaking. Always empty the water tank and move the unit slowly.
Be careful not to knock the unit over !
Do not leave/store with water inside. Store the appliance in its
original box or cover the unit to protect it from dust in a dry place if
it is not being used for a long period of time.
Cleaning the filtration mesh
This is easily accessible by removing the rear plate and removing
the filter. It is recommended that you clean the air filters every two
months (more often if visibly soiled). Built up dust on the filter will
decrease the airflow volume.
•
Remove the plug from the wall outlet.
•
Catch the filtration mesh handle and pull upwards. (shown as
fig.1)
•
Clean the filtration mesh with mild detergent and soft brush.
•
Make sure the filtration mesh is completed dry before
installing.
8
All manuals and user guides at all-guides.com
En
10/2018