Uline H-8590 Mode D'emploi

H-8590, H-8591
PATIO SEATING
TOOL NEEDED
5/32" Allen Wrench
Table Top x 1
NOTE: It is recommended to assemble unit on
a clean, flat, solid surface. Use a drop cloth to
avoid scratching the tabletop.
NOTE: Do not fully tighten screws until table is
completely assembled.
1. Locate all parts before assembly begins.
2. Invert top and set on a protective surface. Loosely
secure first leg using 3/4" hex screws and washers.
(See Figure 1)
Figure 1
PAGE 1 OF 6
All manuals and user guides at all-guides.com
1-800-295-5510
uline.com
PARTS
Legs without Brackets x 2
ASSEMBLY
Legs with Brackets x 2
3. Loosely attach remaining legs until all legs are
attached. Legs with brackets must be opposite each
other. Legs without brackets must be opposite each
other. (See Figure 2)
Figure 2
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
3/4" Hex Screw x 8
9/16" Hex Screw x 8
Flat Washer x 16
0621 IH-8590