Functional Description - Milwaukee 48-11-1830 Manuel De L'utilisateur

FUNCTIONAL DESCRIPTION

4
2
3
4
2
3
6
7
8
5. Cord
6. Label
7. Electrical contacts
8. Bay
9. Vents
10 . Nameplate (on bottom of charger)
11. Light indicator - when a battery pack is inserted into
the charger, the light will indicate the following situations:
Continuous red light: Charging
Continuous green light: Charging is complete
Flashing red light: Battery pack is too hot or too cold - Charging will begin
automatically when battery reaches correct charging
temperature
Flashing red and green light: Damaged or faulty battery pack
1
1. Contacts
2. Fuel Gauge
3. Fuel Gauge button
4. Release buttons
4
4
1
1
4
9 11
4
4
5
MILWAUKEE LITHIUM-ION BATTERY PACK OPERATION
Fuel Gauge
10
Use the Fuel Gauge to determine the battery
pack's remaining run time. Press the Fuel
Gauge button to display the lights. The Fuel
Gauge will stay lit for two seconds.
Approximate Run
Time Remaining
33-54%
10-32%
Less than 10% if bottom light is fl ashing
NOTE: If the Fuel Gauge doesn't appear to
be working, place the battery pack on the
charger and charge as needed.
Symbology
Properly Recycle
Batteries
Double Insulated
Volts Direct
Current
Volts Alternating
Current
Specifi cations
Catalog No.
48-11-1830 V18 Li-Ion Battery Pack
48-11-2830 V28 Li-Ion Battery Pack
48-11-2230* NiCd Battery Pack
* Other 18 Volt NiCd Battery Packs are also available
Input Input
Catalog No. Volts AC Amps
48-59-2818 Charger * 120 2.1
* Charges MILWAUKEE 18-28V Lithium-Ion battery packs and
MILWAUKEE 18V NiCd battery packs.
Unlike other battery pack types, MILWAUKEE
Lithium-Ion battery packs deliver fade-free
power for their entire run time. The tool
will not experience a slow, gradual loss of
power as you work. To signal to you that the
battery pack is at the end of its run time and
78-100%
needs to be charged, power to the tool will
55-77%
drop quickly. When this happens, remove
the tool from the workpiece and charge the
battery pack as needed. If the tool begins to
"pulse", but not run, charge the battery pack
immediately.
NOTE: Immediately after using the battery
pack, the Fuel Gauge may display a lower
charge than it will if checked a few minutes
later. The battery cells "recover" some of their
charge after resting.
5
Underwriters
Laboratories, Inc.,
United States and Canada
Hertz
Amps
Volts DC
18
28
18
Output Output
Volts DC Amps
18-28 3.5