Cleaning And Maintenance - X4-TECH Bobby Joey Mode D'emploi

• Now the microphone can be spoken into.
• The microphone should always be turned off when only cassette
playback mode is being used, to save on power consumption
that discharges batteries faster.
Fast forward with FFWD
During the playback you can fast forward with FFwD (see 4.4).
Public announcements
No cassette necessary. just talk into the microphone and your
voice will be amplified by the device.
• press play (see 4.5) without inserting a cassette.
• Switch the oN/oFF knob (see 4.11) at the mircophone to „oN".
• Now you can start singing or talking into the microphone.
Take care that you don't place the microphone too
close to the speaker – otherwise an acoustic feedback
(squealing from the speakers) can happen. Higher
settings of the microphone volume will result in
greater sensitivity for acoustic feedbacks.

Cleaning and maintenance

DANGER!
Always use a soft, dry and lint-free cloth to clean
the units exterior. If the device is extremely dirty, you
can use a soft cloth dampened with water, or a mild
cleaning solution to clean.
Never use any abrasive or harsh cleaning agents (e.g. alcohol,
petrol or thinners) as these could damage the controls, casing or
any markings and labels found on the device.
29