FAS Easy 6000 Pro Mode D'emploi page 43

EASY 6000 PRO– Issue 00
8.3.4 IDENTIFICATION PARAMETERS
Machine ID: device identification code (enter the serial number indicated on the FAS label)
Client: enter the client code used to access the telemetry site
Model: enter the machine model (e.g. EASY6000)
Machine serial number: this is an 8-digit machine identification numeric code. This will then be entered in
the Audit file for machine identification
The interface, configuration, personalisation and multimedia codes (i.e. the names that were given to the
files) can then be entered. (Zip files to be loaded in the machine)
Server: address of the telemetry site
Unit: identifies membership of a particular machine unit (e.g. machines 2nd floor)
Machine location: the physical position of the machine (e.g. address)
User: leave default data
Password: entered in the password box, which allows the machine to connect to the telemetry site
8.3.5 CUSTOMIZE
Enable Satispay: used to enable the Satispay platform. Enter the KeyID in the Satispay menu to activate the
system.
Enable Paypal: used to enable the Paypal platform.
Enable cart: used to enable the shopping cart function for the end user who can therefore select multiple
products in different sectors and disks and then check out by paying only once.
FAS INTERNATIONAL S.r.l. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
39
E
N
G
L
I
S
H