SOLIS PERFECT BLENDER SLIM Mode D'emploi page 86

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

▲ ■
B L EN D I NG T IP S
The lid and the measuring cup seal should always be in place on the blender jug
during use. The measuring cup seal should only be taken off when warm foods
are processed (see article 59 on page 77). If the volume of the foods lies under
the Max-marking during the blending process and you want to fill more food
into the blender jug, it is enough to remove the measuring cup seal (turn in a
counter-clockwise direction towards "open"). You can add the foods through
the opening in the lid. After that, put the measuring cup back in place and clock
wisely screw it all the way in (towards "lock").
GB
Never remove the blender jug or the blender container while the appliance is
switched on. Vice versa, do not place the blender jug or the blender container
on the motor base while the appliance is switched on.
Never blend boiling hot or even very hot liquids. Always allow the liquids to cool
down first.
Always fill the liquid ingredients into the blender jug first, followed by the soft
ingredients. Add the hard or frozen ingredients last.
Use a plastic spatula to move the ingredients clogged up around the blades,
never use a metal tool, as it might damage the blades or the jug. Always switch
the appliance off, wait for the blades to come to a complete standstill and dis-
connect the power plug before opening the blender jug. Never use your hands
to move the ingredients – risk of injury!
Let the appliance blend for a maximum of 3 minutes.
Chopping hard foods or spices can tarnish the surface of the blender jug or the
blender container, however, this has no effect on the blending performance of
the appliance.
Always use the Pulse function to powerfully chop hard or frozen foods or if the
foods are too thick or rough to circulate inside the blender jug (while in Stand-
by-mode, press and hold the Power button).
Always take note of the Max-marking in the blender jug and the blender con-
tainer when filling in liquids or foods and do not exceed it.
Before chopping ice cubes, fresh herbs, garlic or onion, bread, nuts or spices,
always make sure that the blender jug / blender container and the blade base
are completely dry.
The blender jug is not suitable for the storage of foods. Always transfer foods
to another vessel after blending.
Do not blend and process foods for too long and always supervise the blending
process. The blender should only be operating for the time the foods or the
blending process need to achieve optimal final results.
86

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8327

Table des Matières