SOLIS PERFECT BLENDER SLIM Mode D'emploi page 82

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

S TA RT I N G U P
Place the motor base on a solid, even, dry, stable and moisture resistant work
surface.
Choose a suitable blending vessel.
When using the blender jug, screw the blade base onto the lower part of the
blender jug.
Fill the blender jug / blender container with the foods resp. the liquid. Always
GB
pour the liquid ingredients into the vessel first, followed by the softer ingredi-
ents. Always add the solid or frozen ingredients resp. ice cubes to the vessel last.
Close the blender vessel:
Close the blender jug with the lid, making sure that the spout is covered by
the lid. Then, place the measuring cup in the lid so that both nibs glide into the
recesses. Fasten the measuring cup by turning it in a clockwise direction (towards
"lock") until it locks into place.
Caution: If the measuring cup is not turned all the way in, the jug contents
might splash out!
If you want to use the blender containers for blending, screw the blade base
firmly onto the container.
Place the blender jug / blender container on the motor base so that the grey nib
on the edge of the vessel glides into the recess and the drive screw of the blade
base is properly connected to the motor clutch.
Fully unwind the power cord and connect the power plug to a suitable power
outlet: a long signal sound and the symbol for the blender vessel placed on the
appliance lights up in the display, along with the "vegetable" program.
Note: The appliance can identify the blender jug or one of the two blender con-
tainers thanks to magnets installed into the vessels. The corresponding symbol
lights up in the display:
Blender jug
82
Blender container 600 ml or 400 ml

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8327

Table des Matières