Operating Instructions; Switch On The Instrument; Auto Power Off - Ht Instruments Ht7051 Manuel D'utilisation

5 OPERATING INSTRUCTIONS

5.1 SWITCH ON THE INSTRUMENT

After switch on, the instrument gives a short
acoustic signal and, for approximately one
second, all segments of the display appear.
Then, the instrument shows the firmware
version, then it sets to the last measuring
mode selected before turning off.

5.1.1 Auto Power OFF

If no test is being carried out, the instrument automatically turns off after approximately 5
minutes after the last time a key was pressed. To reactivate the instrument, it is necessary
to turn it on again by pressing the relevant key.
EN - 8
HT7051 - HT7051N