Heat, Cool And Dhw Setpoint Settings - Ferroli OMNIA S 3.2 Manuel D'installation, D'utilisation Et D'entretien

8.4 HEAT, COOL and DHW setpoint settings

SW6
SW1 SW3
SW4
SW2
SW7
SW5
NOTE
The icon indicates which setpoint is being
modified
108
EN
DHW set point
(min 30°C, max 60°C)
To modify the DHW set point, proceed as follows:
• press the SW1 / SW2 buttons to select the set point
• press the SW6 / SW7 keys to modify the set point
• confirm the modified value with SW3 key
Single zone set point
(Cool mode min 5°C, max 25°C - Heat mode min 25°C, max 65°C)
To modify the single zone set point, proceed as follows:
• press the SW1 / SW2 buttons to select the set point
• press the SW6 / SW7 keys to modify the set point
• confirm the modified value with SW3 key
Zone Z1 set point
(Cool mode min 5°C, max 25°C - Heat mode min 25°C, max 65°C)
To modify the set point of zone Z1 proceed as follows:
• press the SW1 / SW2 buttons to select the set point
• press the SW6 / SW7 keys to modify the set point
• confirm the modified value with SW3 key
Zone Z2 set point
(Cool mode min 5°C, max 25°C - Heat mode min 25°C, max 65°C)
To modify the set point of zone Z2 proceed as follows:
• press the SW1 / SW2 buttons to select the set point
• press the SW6 / SW7 keys to modify the set point
• confirm the modified value with SW3 key
Cod. 3541V941 - Rev. 00 - 09/2021
OMNIA S 3.2
Z1
Z2