Publicité
Les langues disponibles
Les langues disponibles
TFD-34TEV
18. Do not move the table during operation.
19. Use the machine only on the approved capacity.
20. Read this guide to find out more details.
21. Never push your hand or fingers in holes of the workpiece during the operation.
22. Visitors and children are not allowed to go near the work area when the machine is
in operation.
23. Do not wear gloves, neckties, rings, bracelets or loose clothing while operation.
24. Do not work with workpieces made of plastic and wood.
25. First, check again the following:
A- that the power voltage is correct
B- that the machine is completely assembled and installed
C- that the chuck of the work table and the work piece is fully secured or fixed firmly.
D- that the chuck key is removed from the chuck.
E- that the drilling tools on the chuck correctly tightened.
26. Switch off the machine immediately:
A- when you fix or remove a workpiece.
B- when you perform a normal maintenance, operation, adjustment or repair.
C- if the person operating leaves the machine
D- if you want to correct a setting on the work table or their position.
E- if you want to replace or remove the drill bit.
5
Publicité
