Technical Specifications - WAHLBACH Elex 8,5 Instructions De Montage Et D'utilisation

DE GB NL FR

Technical specifications

Model Wahlbach
Nom. power rating
Electric supply
Nominal current
Cable size
Flow rate (Δt=25K) L/m
Heating system
Min. water resistance at 15°C
Switch on flow rate
Max. inlet temperature
Non-usage consumption
Protection class
T ype of protection
Dimensions heater (H x W x D)
Unit weight
Water connections
Distance water connections
Max. pressure water mains
Switch on flow pressure
Daily electricity consumption (Q
Load profile
Sound power level (L
Energy efficiency (η
3. USER MANUAL
Do not switch on the device if there is a chance the water inside the de-
vice is frozen.
Without a temperature limiter, high temperatures may be reached at
draw-off points. Keep children away from the draw-off points. Danger
of scalding!
If the selected outflow temperature is not reached when the tap is fully
opened, then the water flow through the device exceeds the capacity of
the device. In this case, the flow should be reduced with the hot water
valve. There is a danger of scalding at outflow temperatures exceeding
43°C.
16
)
elec
)
WA
)
wh3
Elex 8.5
230 V, 50 Hz.
8,5 kW
37 A ⏛ 40 A
3 x 6 mm²
4.5 L/min.
Bare elements
≥ 1300 Ω cm
1.8 L/min.
28 °C
<0.1 Wh/h
I
IP24
325 x 195 x 115 mm
2.9 kg
G½"
100 mm
0 MPa
0.05 MPa
1.249 kWh
S
16 dB
40.5 %