LENCO MC-460 Mode D'emploi page 8

1. Standby button
2. Switch speaker ON/OFF
3. Menu-Main menu
4. Preset-saved stations,Favorites,etc
5. Record Button
6. Eject button
7. Media Center;Go back one track
8. Media Center;Play/Pause
9. Media Center;Go forward one track
10. Stop play button
11. EQ button
Before Started
Network Requirement
1. Before using the Lenco
2. A broadband connection in combination with a wired/wireless access point, router or
similar network device.
3. The network device needs to support WIFI (802.11b/g/n) wireless connection.
(Only 2.4 Ghz)
4. A PC or smart phone with a network ready. This network has to be the same one as the
Lenco MC-460 equipped with.
Symbols on the dislay
Connection is being established, device functioning
No wireless connection
Wireless connection established
FM radio reception: Mono
VHF radio reception: Stereo
12.
13.
14.
15. Enter Confirm selection
16.
17. ▼Down cursor button
18. V- Decrease volume
19. V+ Increase volume
20. 0.....9 Call up favorites/Memory; input
21.
22.
MC-460,the following requirements are needed:
8
Alarm Button
Up cursor button
Left cursor button
Right Cursor button
letters and numbers
Dimmer
Sleep