LENCO MC-460 Mode D'emploi page 19

Power Management
This option configures when the MC-460 should go into standby mode.
You can select Turn off/5 minutes/15 minutes/30 minutes.
When configured, the MC-460 will switch to standby when no music is
played for the configured time.
Use the Turn off setting to ignore the standby function.
Sleep Timer Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once
the time is set, there will be a bed icon with the remaining minutes at the
top right corner of the display and the device will turn to standby after the
configured time.
(You also can use the Sleep button on the remote control to use this function)

Internet
Radio

Weather Activate/deactivate the weather forecast on the standby display. Choose
your preferred temperature unit (°F or °C) and then proceed by entering
your location. When activated, the weather forecast is shown in turns with
the clock display on the standby screen (it changes every 10 secs).

DAB/FM
Setup




Local Radio There is a shortcut Local Radio from the Internet Radio menu so that you
Setup can easily go to the station list of your location. You can setup your location
manually or let the system detect your current location. If you choose to
automatically detect your location, the system will detect the location
according to the IP address of your connected network. Press Local Station
to enter the local radio station list directly.
Playback Select the play mode of the media center. You can select: Off (no repeat or
Setup shuffle), Repeat all, Repeat one,or Shuffle.
Buffer: configure the buffer time of the music playback 2/4/8 Seconds
Sound Quality: High or Low
FM Mode: Set Mono or Set Stereo
FM Threshold
Seek Threshold: Strong, Default or Weak
Stereo Threshold: Strong, Default or Weak
DAB Threshold: Strong, Default or Weak
Service following(FM-IR): Enable or Disable
Service following(DAB-IR): Enable or Disable
19