3.
Remove the cover and visually check the locations of the DSP board and external plate.
DSP board
4.
Remove the external plate from the chassis by unscrewing both Phillips
5.
Remove both Phillips
®
LA-AE S3_UM_ML _2.0
Figure 4: Controller's internal structure (LA8 example)
screws from the DSP board (PH.1) and screw in both spacers (5.5 mm hex socket).
Figure 5: Screw removal (left), spacer mounting (right)
w w w . l - a c o u s t i c s . c o m
External plate
®
screws (PH.1).
EN
9 en