Warnings; Description - Romus DARK WARRIOR 94668 Manuel D'utilisation

Warnings:

Note: the Romus flooring stripper is manufactured in accordance with the applicable European
directives. Guards and protective devices must under no circumstances be removed or modified.
When using the machine, attention should be paid to the following points:
1. Read the instruction manual before using the appliance.
2. The stripper must always be used in accordance with safety rules and technical instructions.
3. The stripper must always be turned off and disconnected when transporting, cleaning, and
carrying out repair or maintenance operations. This also applies when changing tools.
4. The operator must never leave the machine unattended when it is operating.
5. Before leaving the machine, ensure everything has been disconnected. Check also that the
machine cannot roll or move on its own.
6. After maintenance or adjustment, all safety components must be put back in place.
7. Ear defenders must be worn.
8. Eye protectors must be worn.
9. Safety shoes must be worn.
10. Cut-resistant gloves must be worn.
11. If a large amount of dust is produced during the task, it is recommended to use a vacuum
cleaner or other dust collector along with suitable breathing apparatus.
12. Depending on the type of floor, the removal operation may produce gases. The operator is
responsible for wearing any necessary protective devices and clothing required in this instance.
Removing some floors may produce substances harmful to health. Special and suitable
respiratory protection equipment must be worn. In this case, a dust collector must be used.
13. The floor should be swept before removal as certain materials or wastes may be projected.
Screws and bolts in the floor will be more visible if it is cleaned. If the machine hits screws or
bolts, it may be seriously damaged.
14. Only use blades in perfect condition and suited to the intended usage.
15. The machine should only be maintained by qualified persons.
16. Use only original spare parts.
17. Removing the electrical casing is strictly prohibited.

Description:

Electrically-powered, self-propelled flooring stripper. One motor drives a blade which cuts the glue
film between the floor and the covering, another drives wheels which propel the machine forwards
or backwards.
Weights may be removed or added depending on use
E2