English - LENCO CR-605 Manuel D'utilisation

Masquer les pouces Voir aussi pour CR-605:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English

CAUTION:
Usage of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
1.
Do not cover or block any ventilation
openings. When placing the device
on a shelf, leave
5 cm (2") free space around the
whole device.
2.
Install in accordance with the
supplied user manual.
3.
Keep the device away from heat
sources such as radiators, heaters,
stoves, candles and other heat-
generating products or naked flame.
The device can only be used in
moderate climates. Extremely cold or
warm environments should be
avoided. Working temperature
between 0° and 35°C.
4.
Avoid using the device near strong
magnetic fields.
5.
Electrostatic discharge can disturb
normal usage of this device. If so,
simply reset and restart the device
following the instruction manual.
During file transmission, please
handle with care and operate in a
static-free environment.
6.
Warning! Never insert an object into
the product through the vents or
openings. High voltage flows through
the product and inserting an object
can cause electric shock and/or short
circuit internal parts. For the same
reason, do not spill water or liquid on
the product.
7.
Do not use in wet or moist areas such
as bathrooms, steamy kitchens or
near swimming pools.
8.
The device shall not be exposed to
dripping or splashing and make sure
that no objects filled with liquids,
such as vases, are placed on or near
the apparatus.
9.
Do not use this device when
condensation may occur. When the
unit is used in a warm wet room with
damp, water droplets or
condensation may occur inside the
unit and the unit may not function
properly; let the unit stand in power
CR-605
10. Although this device is manufactured
11. This device must operate on a power
12. Keep away from animals. Some
13. To clean the device, use a soft dry
14. The supplier is not responsible for
15. Do not interrupt the connection
16. If the unit has USB playback function,
17. The rating label has been marked on
18. This device is not intended for use by
19. This product is intended for non
20. Make sure the unit is adjusted to a
2
OFF for 1 or 2 hours before turning
on the power: the unit should be dry
before getting any power.
with the utmost care and checked
several times before leaving the
factory, it is still possible that
problems may occur, as with all
electrical appliances. If you notice
smoke, an excessive build-up of heat
or any other unexpected phenomena,
you should disconnect the plug from
the main power socket immediately.
source as specified on the
specification label. If you are not sure
of the type of power supply used in
your home, consult your dealer or
local power company.
animals enjoy biting on power cords.
cloth. Do not use solvents or petrol
based fluids.
To remove severe stains, you may
use a damp cloth with dilute
detergent.
damage or lost data caused by
malfunction, misuse, modification of
the device or battery replacement.
when the device is formatting or
transferring files. Otherwise, data
may be corrupted or lost.
the USB memory stick should be
plugged into the unit directly. Don't
use an USB extension cable because
it can cause interference resulting in
failing of data.
the bottom or back panel of the
device.
people (including children) with
physical, sensory or mental
disabilities, or a lack of experience
and knowledge, unless they're under
supervision or have received
instructions about the correct use of
the device by the person who is
responsible for their safety.
professional use only and not for
commercial or industrial use.
stable position. Damage caused by

Publicité

Table des Matières
loading

Table des Matières