Wagan Tech Power Dome LT Guide D'utilisation page 6

Power Dome LT by Wagan Tech
• Do not connect to the negative terminal. Connect the black (-) clamp to a non-mov-
ing metal part of the vehicle.
• Turn the Master on/off safety switch to the ON position.
• Start the vehicle. If the vehicle does not start, wait 3 minutes before trying again
(failure to wait may damage the Power Dome LT).
• After the vehicle starts, disconnect the black negative clamp first before the red
positive clamp.
Specifications
Battery
Work Light
Compressor
Inverter
12V DC Socket
USB Port
Charging Time
6
12 Volt 12 Amp Rechargeable Sealed Lead Acid Battery
 x LEDs
260 PSI Reading Gauge
110 volt AC 200 Watt
12 volt 10A max.
5 volt 500mA max.
26-28 hours by AC charger at home 6–8 hours by DC charger in
vehicle when engine is running.
www.wagan.com
R