Facom 715 Manuel D'utilisation page 20

Indicator
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Description
Autorange mode is selected
AC
Negative sign
Battery is low and should be replaced immediately.
Warning
To avoid false readings, which could lead to possible electric shock or personal injury,
replace the batteries as soon as the low battery indicator appears.
Insulation test indicator. It appears when insulation test voltage is present.
Note: The " MΩ " terminal outputs high voltage. Be cautious.
Insulation test is in Fixed Time Test mode.
Insulation test is locked so that you can perform the test continuously for a long time.
---Insulation test voltage is 250V.
---Insulation test voltage is 500V.
--Insulation test voltage is 1000V.
Diode test is selected.
Continuity test is selected.
Manual range mode is selected.
Automatic power-off is enabled.
Data Hold is enabled.
Relative mode is active.
Maximum reading is being displayed.
Minimum reading is being displayed.
20