•
The unit components must be cleaned with water and normal washing-up liquid, thor-
oughly rinsed and dried before being reassembled.
•
The area of the engine housing, located behind the blade (3), must be thoroughly cleaned
using a damp cloth.
Do not use abrasive cleaners or scouring pads for cleaning.
Do not use metal or sharp objects to remove food residue from the
blade.
Before inserting the power plug into the wall outlet, make sure the
appliance is completely dry.
> > Blade cleaning
It is not necessary to remove the blade to clean it.
•
Moisten a cloth with alcohol or edible oil.
•
Press with the damp cloth on the surface of the blade and move it slowly from the center
outwards, as shown in figure.
10
"0"
"0"
EN
3
"F"
29