R.G.V. AUSONIA 190 Manuel D'utilisation page 24

Couteau électrique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
• Do not install this appliance; near heater, inflammable material;
in a humid, oily or dusty location, in a location exposed to direct
sunlight and water or where gas may leak; on unlevel ground.
• Do not spray volatile material such as insecticide onto the surface
of the oven.
• Always pull the plug out of the socket before cleaning the appliance.
• To avoid overheating, the device should not be kept in continuous
operation for more than 10 minutes.
If you must perform machining operations in succession or with
longer times, to perform breaks of at least 5 minutes between cycles
and reducing the time of continuous operation at 5 minutes.
Safety
E
• Do not attempt to repair the appliance.
Potential injury from misuse!
Avoid contact with all moving parts.
Switch off the appliance and disconnect from supply before chang-
ing accessories or approaching parts that move in use.
F
To Reduce the risk of injury to persons
GROUNDING INSTALLATION
• This appliance must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a
cord having a grounding wire with a grounding plug. The plug must be
plugged into an outlet that is properly installed and grounded.
Electric Shock Hazard. Improper use of the grounding can result in
electric shock. Do not plug into an outlet until appliance is properly
installed and grounded.
Do not disassemble this appliance.
24

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour R.G.V. AUSONIA 190

Ce manuel est également adapté pour:

Ausonia 2209000090001

Table des Matières