Table des Matières
Publicité
SCHEDULE
EC TYPE-EXAMINATION CERTIFICATE
13
DESCRIPTION OF COMPONENT
The BPG range of enclosures are manufactured from polyester in the following sizes:
The enclosures may also be manufactured to sizes not specified in the table. This assumes that any
given dimension is not larger than the respective dimension of the largest enclosure or smaller than the
respective dimension of the smallest enclosure. The enclosure lids may be hinged or detachable and
are retained captive screws. All boxes are fitted with closed cell silicone rubber gaskets. Entries may
be provided either through the side walls or the rear of the box and external and internal earthing
facilities are provided.
Variation 1 (dated 28 September 2001) - This variation introduced the following changes:
i.
The recognition of a minor revision of the information marked on the label.
Variation 1 (dated 10 March 2008) - This variation introduced the following changes:
i.
The BPG 13.5 enclosure was added to the range.
Variation 2 - This variation introduced the following changes:
i.
The option to fit slotted trunking inside the enclosures, this trunking may be sited as required.
The instructions were modified to recognise additional restrictions associated with this change and
a new Condition of Manufacture was introduced.
ii.
The recognition of minor drawing modifications including the introduction of a new company logo;
these amendments are administrative or involve changes to the design that do not affect the
aspects of the product that are relevant to explosion safety.
iii.
The materials used to construct these enclosures were clarified and are recorded below:
•
BPG is used for all colours except black
•
Anti-static BPGC is the black version
This certificate and its schedules may only be
reproduced in its entirety and without change.
Form 9401 Issue1
BPG
Length
Reference
(mm)
1
80
2
110
3
160
4
190
5
230
6
122
7
220
8
160
9
260
10
360
11
560
12
255
13
400
13.5
400
14
600
15
400
Page 2 of 4
C E R T I F I C A T I O N
Width
Height
(mm)
(mm)
75
55
75
55
75
55
75
55
75
55
120
90
120
90
160
90
160
90
160
90
160
90
250
120
250
120
250
160
250
120
405
120
Sira Certification Service
Rake Lane, Eccleston, Chester, CH4 9JN, England
Tel:
Fax:
Email:
Web:
Sira 99ATEX3172U
Issue 6
+44 (0) 1244 670900
+44 (0) 1244 681330
info@siracertification.com
www.siracertification.com
Publicité
Table des Matières
