LaserLiner HD 3D-ControllerCamera Mode D'emploi page 7

2
Replacement of the camera unit
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents
and solvents. Store the device in a clean and dry place.
Technical data
Protection class
Operating conditions
Storage conditions
Weight
Dimensions (W x H x D)
EU and UK directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU and the UK.
This product, including accessories and packaging, is an electrical appliance that must be
recycled in an environmentally appropriate manner in accordance with European and UK
directives on waste electrical and electronic equipment, batteries and packaging, in order to
recover valuable raw materials.Electrical devices and packaging do not belong in household
waste. Look for information on local disposal facilities and note the relevant disposal and
safety information at the collection points.
Further safety and supplementary notices at:
https://packd.li/ll/aol/in
HD 3D-ControllerCamera
2. 1.
IP 54
0°C ... 45°C, max. humidity 80% rH, no condensation,
max. working altitude 2000 m above sea level
-10°C ... 60°C, max. humidity 80% rH, no condensation
540 g (incl. holder)
190 mm x 145 mm x 88 mm
3.
Subject to technical alterations. 24W39
07
EN