Power Supply; Inserting / Changing Batteries - easymaxx SP-11 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6 NEXT
Press briefl y: go to next track; hold down: fast-forward
7 FUNC
Press repeatedly to switch between: Bluetooth
dium, SD card, external device (AUX), radio; in radio mode: switch from
FM to AM
8 STOP
In USB/SD mode: stop playback
9 PLAY
Start / pause playback; in BT mode: stop
10 POWER
On / Off
11
Handle
12
Telescopic aerial that can be rotated / pulled out
13 RADIO
Operating lamp: lights up when the radio is switched on
14 TUNING
Turn to set the frequency
15
Frequency display
16 VOLUME Volume control
17
Speaker
18 IN DC 6V On the back: socket for connecting a mains adapter
19
On the back: battery compartment
20 BT
Operating lamp: fl ashes while searching for a Bluetooth
lights up constantly when a connection has been made to a Bluetooth
enabled device
21 USB/SD/
Lit up blue: USB is activated; lit up red: SD card is activated: lit up violet:
AUX
AUX is activated

Power Supply

The device can both be operated with batteries and be connected to the mains power
supply.

Inserting / Changing Batteries

PLEASE NOTE!
Always replace all batteries together. Do not use batteries of different types or brands,
or batteries with different capacities. When replacing batteries, ensure the correct
polarity (+ / –).
Before inserting the batteries, check whether the contacts in the battery compartment
and on the batteries are clean, and clean them if necessary.
Use only the battery type specifi ed in the technical data, preferably powerful alkaline
batteries.
You require 4 Baby C batteries (1.5 V).
1. Remove the battery compartment cover: Press the catch above the battery compart-
ment (19) towards the battery compartment and fl ip it open.
2. Insert four Baby C batteries (1.5 V) into the battery compartment, or replace old bat-
teries with new ones. Pay attention to the correct polarity (+ / –).
3. Insert the battery compartment cover into the battery compartment and fl ip it shut.
Replace the batteries when the power of the device starts to wane.
17
connection, USB me-
®
-enabled device,
®
EN
-
®

Publicité

Table des Matières
loading

Produits Connexes pour easymaxx SP-11

Ce manuel est également adapté pour:

0837406842

Table des Matières