1 LED lights up
2 LEDs light up
3 LEDs light up
4 LEDs light up
*
This is the approximate percentage
of battery capacity but not actual
measurement .
Power saving mode
The power saving mode reduces
the self-current consumption if you
stop using the product or store the
product for a long period of time .
Activating the power saving mode:
Press and hold the battery status
button
for 3 seconds .
[
7 ]
Deactivating the power saving
mode: Press the ON/OFF switch
and the battery status button
simultaneously or charge the
product .
Operation
RISK OF ACCIDENT! Preferably
m
do not use the product whilst
driving the vehicle . When using the
product in a vehicle, be sure this
does not endanger the driver or the
passengers . Always store and secure
the product so that even full braking
does not pose a risk of injury from
the product or product damage .
=
25 %*
=
50 %*
=
75 %*
=
100 %*
2 ]
[
7 ]
[
Turn the adjustable foot/hand grip
and fix the product at desired
position . For that tighten the screw
of the hinge joint
adjustable foot/hand grip
be turned up by approximately 180º
and be used as a hand grip .
The product can also be fixed by
attaching it to a flat ferromagnetic
surface with the magnet
adjustable foot/handle
CAUTION! Please note the position
m
of your hands whilst turning the
adjustable foot/hand grip
prevent pinching your fingers.
The product may be used as a light
and a power bank .
NOTE: The energy stored in the
rechargeable batteries power both
the LED light and the power bank .
Using the product as a power bank
therefore reduces the operating time and
brightness in lighting mode .
Using as a LED light
Fully charge the product as
described in the section "Charging
the product" .
The product can be operated in
4 different modes. Select these by
repeatedly pressing the ON/OFF
switch
.
2 ]
[
ON/OFF
Mode
switch
Press 1x:
The white light lights up at
maximum mode .
Press 2x:
The white light lights up at
Eco mode .
[
4 ]
by hand . The
3 ]
[
can also
4 ]
[
of the
[
5 ]
.
[
4 ]
to
4 ]
[
GB/IE
25