D Using The Built-In Flash - Canon EOS Rebel SL2 Mode D'emploi

D Using the Built-in Flash

In indoor, low light, or backlit conditions in daylight, just raise the built-in
flash and press the shutter button to easily take beautiful pictures. In the
<d> mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set
automatically to prevent camera shake.
Effective Range of Built-in Flash
ISO Speed
(p.102)
ISO 100
ISO 400
ISO 1600
ISO 6400
* When a high ISO speed is set and focusing distance is long, appropriate
exposure may not be obtained depending on the subject conditions, etc.
Press the <D> button.
1
In Creative Zone modes, you can
press the <D> button anytime to take
flash pictures.
While the flash is recharging,
"DbuSY" is displayed in the
viewfinder, and [BUSYD] is displayed
on the LCD monitor.
Press the shutter button halfway.
2
In the bottom left of the viewfinder,
check that the <D> icon is displayed.
Take the picture.
3
When focus is achieved and you
press the shutter button completely,
the flash will fire at all times.
EF-S18-55mm f/4-5.6 IS STM
Wide Angle
f/4
1 - 2.5 / 3.3 - 8.2
1 - 4.9 / 3.3 - 16.1
1.2 - 9.8 / 3.9 - 32.2
2.5 - 19.6 / 8.2 - 64.3
(Approx. in meters / feet)
Telephoto
f/5.6
1 - 1.8 / 3.3 - 5.9
1 - 3.5 / 3.3 - 11.5
1 - 7.0 / 3.3 - 23.0
1.8 - 14.0 / 5.9 - 45.9
117