Koenig KSI 240 Mode D'emploi page 23

Self clean function
The self clean function cleans the product of
impurities. Cleaning with the self clean system
should be carried out as follows before the first
use, after longer periods of disuse or every 10
to 15 days:
1. Unplug the power plug from the power
outlet.
2. Put the steam control knob to the
Position.
3. Fill the water tank to the MAX mark.
4. Put the product onto its stand base.
5. Connect the power plug to a suitable
power outlet.
6. Set iron to the maximum temperature.
Disconnect from the power outlet as soon
as the temperature control light turns off.
7. Hold the device in a horizontal position over
a sink. Press on SELF CLEAN and continue
pressing.
8. Gently move the device back and forth until
damp and hot water cease to escape.
9. Shake out any remaining water out of the
water fill opening. Once the soleplate has
cooled down, it can be cleaned with a damp
cloth.
Caution
Do not put any vinegar or other decalcifying
agents into the water tank.
Do not dispose of this product as
unsorted municipal waste. Return it
to a designated collection point for
the recycling of WEEE. By doing so, you will
help to conserve resources and protect the
environment. Contact your retailer or local
authorities for more information.
KSI240_A5_130301.indb 21
1 1 2
3 4
5 6
7 8
9
English
21
1/3/13 9:45 AM