Koenig KSI 240 Mode D'emploi page 22

English
After Use
1. Unplug the power plug from the power
outlet.
2. Put the iron back onto its stand base.
3. Let the product cool down.
Automatic Switch-off
This product switches off automatically if it
has not been used for a certain period of time.
Once the product is moved again, it switches
itself on again.
Note
A short acoustic alarm signal is heard and the
LED light on the handle starts to flash.
Cleaning and care
1. Put the steam control on the
2. Unplug from the power outlet and let the
product cool down.
3. Rinse off the calcium particles and other
deposits from the soleplate with a damp
cloth and some detergent.
4. Clean the upper part of the iron with a
damp cloth.
5. Rinse out the water tank regularly with
clear water and then empty it.
6. Keep the product upright in a safe and dry
place.
Note
In order to keep the soleplate smooth, it
should not come into contact with metal
objects.
20
KSI240_A5_130301.indb 20
1 1
8 min
Position.
Caution
Do not use any abrasive sponges, vinegar
or other chemicals in order to clean the
soleplate.
2
Horizontal position
If the product
is sitting on its
soleplate and is
not moved for 30
seconds, it switches
off automatically.
Vertical position
This product
switches off after
approx. 8 minutes, if
it is on its stand base
and is not in used.
1/3/13 9:44 AM