Medion Lifesmart TV MD 86883 Mode D'emploi page 120

The subtitle language cannot be changed or is not being displayed.
• The file being played does not contain any subtitles.
MP3/WMA/JPEG/DivX files cannot be played.
• The files were recorded in a format not supported by the product.
NOTE
The playback of all formats cannot be guaranteed due
to the large number of different codecs.
HDMI
There is no picture on the HDMI playback unit which is connected.
• Disconnect HDMI cable and reconnect.
• Switch HDMI unit off and back on again.
• The video input on the television set or monitor must be set to the
Lifesmart TV.
• The HDMI cable must have full HDMI compatibility. There may be no
picture if you are using a cable which does not conform to the standard.
There is no sound on the HDMI playback unit which is connected.
• Some HDMI-compatible units have no audio output (consult the
operating instructions for the unit which is connected).
• If your output equipment does not have a Dolby or DTS-capable decoder,
go to the menu TV Mode Setup and set the option [HDMI Audio
Mode] to [PCM Stereo] (see Page 115).
Reset facility
• The product is malfunctioning.
The product can be reset as follows:
Open the menu "System Setup/Reset to default".
•
• Select this item and press OK to reject all the input settings and to restore
the product to its original factory settings.
Troubleshooting
119 of 198
DE
EN
FR